for apple instal PT Photo Editor Pro 5.10.4

Sudo cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq PWM If it boots successfully, then you can check the following values to confirm that it has been successfully overclocked: Note that there is a chance that it will not boot after this modification, and then you need to re-burn the firmware to recover. Here is a simple overclocking procedure for reference only, no guarantee for stability and safety.Ĭheck the files under /boot: fw_dynamic.bin #opensbiĬopy light-lpi4a_2Ghz.dtb and overwrite it with light-lpi4a.dtb, reboot, and then you can change the maximum frequency after booting. The TH1520 runs at 1.85GHz by default, but preliminary tests show that about 80% of the chips can run at 2GHz, and about 50% of the chips can pass the stress test at 2GHz.

Chip temperatureĬat /sys/class/thermal/thermal_zone0/temp Please maintain good heat dissipation to keep the CPU below 60 degrees for optimal performance. Note that the system comes with a temperature control policy that will downclock the system when it is too idle or too hot. Sudo cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq

For apple instal PT Photo Editor Pro 5.10.4